How Does Mud Gas Separator Work?

• Mar 18, 2022
• KOSUN MUD/GAS SEPARATOR unit is an extremely reliable, vital piece of safety equipment for today's drilling operations. It is ideal for use where drilling is likely to encounter large volumes of gas, sour gas or when an operator is drilli...

How It Works
 

KOSUN MUD/GAS SEPARATOR system consists of a cylindrical pressure vessel in a fixed vertical position. Inside is a series of specially angled baffle plates, stepped from the top to the bottom.

 

When contaminated mud is routed into the separator, it flows downward successively over each plate. During this process, the heads of entrained gases “break out.” The released gas is then carried by the vent lines to a remote location where it can be safely flared.

 

The flow of liquid from the vessel can be regulated by a liquid-level-control valve or a U-tube, ensuring adequate retention time in the separator for the gas to break out.

 

 

The gas delivery from the MUD/GAS SEPARATOR unit to the flare line can be controlled by a back-pressure manifold (valve) in the flare line. KOSUN MUD/GAS SEPARATOR unit is ideal to assist in controlling dangerous, near-surface expansion and accumulation of gas during a well kick.

Operating pressure within the separator is equal to the friction pressure of the free gas venting through the vent line. Fluid is maintained at a specific level (mud leg) within the separator at all times. If the friction pressure of the gas venting through the vent line exceeds the mud-leg hydrostatic pressure within the separator, a blow-through condition will result in sending a mud/gas mixture to the mud tanks. As one can readily see, the critical point for separator blow-through exists when peak gas flow rates are experienced in the separator. Peak gas flow rates should theoretically be experienced when gas initially reaches the separator.

Features

■Highly efficient baffling system maximizes mud/gas separation while minimizing mist carryover and gas-cut mud at the flow line

■Designed for constant underbalanced drilling

■Corrosion-resistant, epoxy coated to ensure long life

■Versatile configuration

 

Benefits

■Optimizes safe drilling practices

■Enables more efficient separation of emulsions and gas-cut mud in either oil or gas environments

■Minimizes gas-cut mud and mist carryover

■Can be raised or lowered for flow-line adjustments to minimize piping

 

 

We are a mud gas separator supplier. Please feel free to contact us if you need them!