The linear motion shale shaker is the first stage of solids control equipment in drilling purification system. It can remove cuttings with diameter above 75μm brought from the drilling well and leave the liquid with smaller particles into the tanks below, which will flow into next grade solids control equipment to be treated.

Structure of Shale Shaker Deck

KOSUN LS series Linear Motion shale shaker is an equipment with welded structure. Vibration motor & screen plate base are installed into screen basket with special parts. Screen basket is fixed on the adjustment beam. At each of the four vertexes of the screen basket put a vibration damping spring, which can prevent the adjoining parts and devices from being affected by the vibration.There are several shale shaker screen panels on screen basket, and they are fixed and adjusted by snap-on screw bolts and hooking tensioners so that the combined effect of horizontal and vertical supporting bars may provide enough strength for screens basket. And the panels appear in an arched shape, thus making the panels more easily tensioned and more intimately connected with the frames, blessing them with longer service life as well as increasing the processing efficiency of particles.

AWD Angle Adjustment System

KOSUN patented AWD angle adjustment system can raise or lower the end of screen basket while the machine is working. This part includes two vertical column assemblies that are connected on the upper beam assembly and are attached to the shaker base. The mobile part of AWD consists of the lower beam, limiting device that controls vertical movement and screw rod that drives the upward and downward movement of the screen basket. Both ends of screw rod are hinged with the upper and lower beam assemblies respectively. Positive and negative rotating handles can make the screen basket move upward and downward respectively. The screen basket angle of linear motion shale shaker can be arbitrarily adjusted within -1°~5° at an increment of 0.5°as required.

Feeder of Linear Motion Shale Shaker

The mud returned from the well or cuttings to be treated will flow into the shale shaker via the feeder. The feeders can be categorized into weir type, box type and bucket type. The weir type and box type feeders are mainly used to buffer the flow rate of drilling fluid and evenly distribute the fluid onto the screen to reduce the impact of drilling fluid on the screen, extend the service life of screen and improve the treatment effect. Besides, the weir type feeder can also short-circuit the machine if necessary. The bucket type feeder is mainly used with the dryer shaker to collect and distribute cuttings.

The Economy of Linear Motion Shale Shaker

KOSUN linear motion shale shaker is especially effective while drilling top-hole sections where heavy and high-volume solids are usually encountered. During the interval, drilling fluids shale shaker unit may generate powerful G-forces and its effective vibrating motion can quickly remove the dense solids from screens and particles from wells. Linear motion shale shaker is also called stainless steel screen shale shaker.

Linear Motion Shale Shaker Features & Benefits:

1. G-forces linear motion up to 7.4 G(adjustable depending on the situation)

2. Hi-speed conveyance of cuttings

3. Higher shaker-fluids capacity

4. Able to process heavier solids loads

5. Enhances cuttings processing volume

6. Able to adjust the basket angle adjusting device from -1°~5°

7. Can easily change the changes with the one-sided tensioning system installed

8. Can choose between the weir feeder or box feeder

9. Can choose between PMD and PWP hooking screens

KOSUN is a leader in China’s solids control industry and expert in drilling waste management. KOSUN is capable of providing customers with such four series as oil & gas drilling mud solids control equipment, centrifuges, drilling waste treatment equipment and drilling security equipment, including Linear Motion Shale Shaker,Decanter Centrifuge ,Mud Cleaner,Desander, Desilter,Vacuum Degasser,Diesel tank,Screw Pump,Water Tank,Submersible Slurry Pump,Balanced Elliptical Motion Shaker,Mud Tank,Shear Pump,Mud Agitator,Jet Mud Mixer,Mud Gun,Centrifugal Pump,D Series Decanter Centrifuge,vertical cuttings dryer,Hi-G Dryer,Screw Conveyor,Mud/Gas Separator,Hydrocyclone,Shale Shaker Screen,Ignition Device,and can also customize packaged design and matching products of oil & gas drilling rigs for drilling contractors.

Read more Vacuum Degasser:http://www.shale-shakers.com/solids-control-equipment/vacuum-degasser.html
Read more Vertical Centrifuge:http://www.shale-shakers.com/drilling-waste-management/vertical-cuttings-dryer.html

If you want to know more information about Linear Motion shale shaker, you can contact us online or email us to office@adkosun.com.